DUMP BODY TYPE KS 10

for truck chassis up to 3,500 kg

KS 10- HK Proleter Kragujevac

KS 10 - 2.800 mm

• length cargo box: approx. 2,800 mm
• Width: 2,000 mm
• height of side / rear side: 400 mm
• cargo box volume: approx. 2.2 m3
• weight of the superstructure: approx. 600 kg

KS 10–3.000mm

• cargo box length: 3,000 mm
• Width: 2,000 mm
• height of side / rear side: 400 mm
• cargo box volume: approx. 2.4 m3
• weight of the superstructure: approx. 630 kg

KS 10 – 3.300 mm

• cargo box length: 3,300 mm
• Width: 2,000 mm
• height of side / rear side: 400 mm
• cargo box volume: approx. 2.6 m3
• weight of the superstructure: approx. 660 kg

KS 10 – 3.600 mm

• cargo box length: 3,600 mm
• Width: 2,000 mm
• height of side / rear side: 400 mm
• cargo box volume: approx. 2.8 m3
• weight of the superstructure: approx. 690 kg

Standard equipment:

  • for truck chassis equipped with a PTO
  • number of axles: 2
  • type: three sided tipper
  • technical load capacity: cca. 1.600 kg
  • height of the front wall: 450 mm
  • the material of the front wall and the thickness: St 52/2 mm
  • the material of the side / rear board and the thickness: St 52/2 mm
  • side board: singled one piece
  • the opening of the side boards: flap
  • the opening of the back board: flap
  • floor material and the thickness: HARDOX 400 / 2.5 mm (St 52)
  • the system raising of the tipper: centrally located telescopic hydraulic cylinder
  • complete hydraulics
  • drive hydraulic pumps over power outputs from vehicles (PTO)
  • control – tipping load: valve (joystick) in the cabin located laterally to the driver’s seat
  • steel parts are sandblasted and painted twice
  • sub frame painted in the color of the vehicle
  • tipper body painted in monochrome color of the vehicle cab or customer specification
  • side underrun protection according to CE standards – not required
  • mudguards on the rear wheels
  • electrical installations
  • outline marker lights
  • attest

Additional equipment at extra charge

  • excerpt from the transmission from the truck chassis, with installation, depending on the type of truck chassis and transmission
  • toolbox with carriers
  • elevated front wall (600 mm) with mesh protection of the cabin
  • elevated side walls (removable, mesh + 400 mm)
  • aluminum side and back boards
  • spare wheel carrier
  • side underrun protection according to CE standards
  • for truck chassis with no possibility of installing excerpts from gearbox: Drive and hydraulic system to raise over hydro / electric generators
Scroll to Top