for truck chassis up to 3,500 kg
KS 10 - 2.800 mm
• length cargo box: approx. 2,800 mm
• Width: 2,000 mm
• height of side / rear side: 400 mm
• cargo box volume: approx. 2.2 m3
• weight of the superstructure: approx. 600 kg
KS 10–3.000mm
• cargo box length: 3,000 mm
• Width: 2,000 mm
• height of side / rear side: 400 mm
• cargo box volume: approx. 2.4 m3
• weight of the superstructure: approx. 630 kg
KS 10 – 3.300 mm
• cargo box length: 3,300 mm
• Width: 2,000 mm
• height of side / rear side: 400 mm
• cargo box volume: approx. 2.6 m3
• weight of the superstructure: approx. 660 kg
KS 10 – 3.600 mm
• cargo box length: 3,600 mm
• Width: 2,000 mm
• height of side / rear side: 400 mm
• cargo box volume: approx. 2.8 m3
• weight of the superstructure: approx. 690 kg
Standard equipment:
- for truck chassis equipped with a PTO
- number of axles: 2
- type: three sided tipper
- technical load capacity: cca. 1.600 kg
- height of the front wall: 450 mm
- the material of the front wall and the thickness: St 52/2 mm
- the material of the side / rear board and the thickness: St 52/2 mm
- side board: singled one piece
- the opening of the side boards: flap
- the opening of the back board: flap
- floor material and the thickness: HARDOX 400 / 2.5 mm (St 52)
- the system raising of the tipper: centrally located telescopic hydraulic cylinder
- complete hydraulics
- drive hydraulic pumps over power outputs from vehicles (PTO)
- control – tipping load: valve (joystick) in the cabin located laterally to the driver’s seat
- steel parts are sandblasted and painted twice
- sub frame painted in the color of the vehicle
- tipper body painted in monochrome color of the vehicle cab or customer specification
- side underrun protection according to CE standards – not required
- mudguards on the rear wheels
- electrical installations
- outline marker lights
- attest
Additional equipment at extra charge
- excerpt from the transmission from the truck chassis, with installation, depending on the type of truck chassis and transmission
- toolbox with carriers
- elevated front wall (600 mm) with mesh protection of the cabin
- elevated side walls (removable, mesh + 400 mm)
- aluminum side and back boards
- spare wheel carrier
- side underrun protection according to CE standards
- for truck chassis with no possibility of installing excerpts from gearbox: Drive and hydraulic system to raise over hydro / electric generators
