for truck chassis from 18,001 to 26,000 kg
KS 160 – 4.500 mm
• cargo box length: 4,500 mm
• Width: 2,300 mm
• height of side / rear side: 850 mm
• cargo box volume: approx. 8.7 m3
• weight of the superstructure: approx. 2,700 kg
KS 160 – 4.800 mm
- dužina tovarnog sanduka : 4.800 mm
- širina : 2.300 mm
- visina bočnih / zadnje stranice: 850 mm
- zapremina tovarnog sanduka : 9,4 m3
- težina nadgradnje : cca. 2.800 kg
KS 160 – 5.000 mm
• cargo box length: 5,000 mm
• Width: 2,300 mm
• height of side / rear side: 850 mm
• cargo box volume: 9.8 m3
• weight of body: about 2,950 kg
KS 160 – 5.200 mm
• cargo box length: 5,200 mm
• Width: 2,300 mm
• height of side / rear side: 850 mm
• cargo box volume: 10.2 m3
• weight of body: about 3,120 kg
Standard equipment:
- for truck chassis equipped with a PTO
- number of axles: 3type: three sided tipper
- technical load capacity: cca. 15.500 kg
- height of the front wall: 1.000 mm
- the material of the front wall and the thickness: St 52 / 3 mm
- the material of the side / rear board and the thickness: St 52 / 3 mm
- side board: singled one piece
- the opening of the side boards: deflection
- the opening of the back board: deflection (automatic)
- floor material and the thickness: HARDOX 400 / 5 mm
- the system raising of the tipper: centrally located telescopic hydraulic cylinder
- complete hydraulics
- drive hydraulic pumps over power outputs from vehicles (PTO)
- control – tipping load: valve (joystick) in the cabin located laterally to the driver’s seat
- steel parts are sandblasted and painted twice
- sub frame painted in the color of the vehicle
- tipper body painted in monochrome color of the vehicle cab or customer specification
- side underrun protection according to CE standards
- mudguards on the rear wheels
- electrical installations
- outline marker lights
- attest
Additional equipment at extra charge:
- excerpt from the transmission from the truck chassis, with installation, depending on the type of truck chassis and transmission
- installation of hydraulics for tipper trailer
- toolbox with carriers
- material / floor thickness: HARDOX 400 – 6 mm
- the material of the side / rear board and the thickness 4 mm
- double opening of the rear wall, flap / deflection (manual)
- double opening of the singled side boards, deflection/ flap with spring set
- double side boards, opened by deflection
- double opening of the two-part side boards, deflection / flap
- demountable middle pillars at doubled side boards
- steel side walls height 1.000 mm / front wall 1.200 mm
- steel side walls height 1.100 mm / front wall 1.300 mm
- aluminum side and rear walls height 900 mm, profile 75 / 60 / front steel wall height 1.100 mm
- aluminum side and rear walls height 1.000 mm, profile 75 / 60 / front steel wall height 1.200 mm
- Bordmatic, hydraulic board opening on one side of the single one-pieced side boards, for board height 850 mm
- Bordmatic, hydraulic board opening on one side of the single one-pieced side boards, for board height 1.100 mm
- installation of hydraulics for tipper trailer with Bordmatic
- performance pallet width of the tipper 2.420 mm
- spare wheel carrier
- spare wheel carrier, lying under the sub frame of the tipper
- extension for unloading asphalt 300 mm (demountable)
- tarpaulin cover for asphalt, with no mechanism (heat resistant)
- tarpaulin cover with mechanism (normal)
